Van der Waals Engineering of Ultrafast Carrier Dynamics in Magnetic Heterostructures.

Heterostructures composed of the intrinsic magnetic topological insulator MnBi2Te4 and its nonmagnetic counterpart Bi2Te3 host distinct surface electronic band structures depending on the stacking order and exposed termination. Here, we probe the ultrafast dynamical response of MnBi2Te4 and MnBi4Te7 following near-infrared optical excitation using time- and angle-resolved photoemission spectroscopy and disentangle surface from bulk dynamics based on density functional theory slab calculations of the surface-projected electronic structure. We gain access to the out-of-equilibrium charge carrier populations of both MnBi2Te4 and Bi2Te3 surface terminations of MnBi4Te7, revealing an instantaneous occupation of states associated with the Bi2Te3 surface layer followed by carrier extraction into the adjacent MnBi2Te4 layers with a laser fluence-tunable delay of up to 350 fs. The ensuing thermal relaxation processes are driven by phonon scattering with significantly slower relaxation times in the magnetic MnBi2Te4 septuple layers. The observed competition between interlayer charge transfer and intralayer phonon scattering demonstrates a method to control ultrafast charge transfer processes in MnBi2Te4-based van der Waals compounds.

Structure of the moiré exciton captured by imaging its electron and hole.

Interlayer excitons (ILXs) - electron-hole pairs bound across two atomically thin layered semiconductors - have emerged as attractive platforms to study exciton condensation1-4, single-photon emission and other quantum information applications5-7. Yet, despite extensive optical spectroscopic investigations8-12, critical information about their size, valley configuration and the influence of the moiré potential remains unknown. Here, in a WSe2/MoS2 heterostructure, we captured images of the time-resolved and momentum-resolved distribution of both of the particles that bind to form the ILX: the electron and the hole. We thereby obtain a direct measurement of both the ILX diameter of around 5.2 nm, comparable with the moiré-unit-cell length of 6.1 nm, and the localization of its centre of mass. Surprisingly, this large ILX is found pinned to a region of only 1.8 nm diameter within the moiré cell, smaller than the size of the exciton itself. This high degree of localization of the ILX is backed by Bethe-Salpeter equation calculations and demonstrates that the ILX can be localized within small moiré unit cells. Unlike large moiré cells, these are uniform over large regions, allowing the formation of extended arrays of localized excitations for quantum technology.

Experimental measurement of the intrinsic excitonic wave function.

An exciton, a two-body composite quasiparticle formed of an electron and hole, is a fundamental optical excitation in condensed matter systems. Since its discovery nearly a century ago, a measurement of the excitonic wave function has remained beyond experimental reach. Here, we directly image the excitonic wave function in reciprocal space by measuring the momentum distribution of electrons photoemitted from excitons in monolayer tungsten diselenide. By transforming to real space, we obtain a visual of the distribution of the electron around the hole in an exciton. Further, by also resolving the energy coordinate, we confirm the elusive theoretical prediction that the photoemitted electron exhibits an inverted energy-momentum dispersion relationship reflecting the valence band where the partner hole remains, rather than that of conduction band states of the electron.

Directly visualizing the momentum-forbidden dark excitons and their dynamics in atomically thin semiconductors.

Resolving momentum degrees of freedom of excitons, which are electron-hole pairs bound by the Coulomb attraction in a photoexcited semiconductor, has remained an elusive goal for decades. In atomically thin semiconductors, such a capability could probe the momentum-forbidden dark excitons, which critically affect proposed opto-electronic technologies but are not directly accessible using optical techniques. Here, we probed the momentum state of excitons in a tungsten diselenide monolayer by photoemitting their constituent electrons and resolving them in time, momentum, and energy. We obtained a direct visual of the momentum-forbidden dark excitons and studied their properties, including their near degeneracy with bright excitons and their formation pathways in the energy-momentum landscape. These dark excitons dominated the excited-state distribution, a surprising finding that highlights their importance in atomically thin semiconductors.

Mononuclear Ru(II) Complexes of an Arene and Asymmetrically Substituted 2,2'-Bipyridine Ligands: Photophysics, Computation, and NLO Properties.

By using monosubstituted 2,2'-bipyridine asymmetric ancillary ligands with different electron donor moieties and an arene ligand (p-cymene), we successfully designed and synthesized six Ru(II) compounds (RuBPY1-6) that belong to a piano-stool-type system. The NLO properties of the synthesized complexes have been studied in both solution and the solid state. The electronic spectra of these compounds show a broad feature with two absorption bands in the visible window (350-650 nm). RuBPY1-6 complexes exhibit NIR emission spectra in the solution state (at >720 nm), the maxima of which are bathochromically shifted in comparison to those of the concerned ligands. Interestingly, compounds RuBPY1-6 show NIR emission in their solid state too. Title compounds RuBPY1-6 have lifetimes in the range of 0.2 to 0.9 ns. An important feature of this work is the π-association of the p-cymene ligand to Ru(II) in the synthesized complexes; the π complex is formed by breaking the symmetry of p-cymene, found in the starting precursor (Ru2 dimer). This has been established by NMR spectral studies along with DFT calculations on the 1H NMR spectra. We could derive the molecular structure of the cationic part of this system by density functional theory (DFT), associated with 1H NMR spectral studies. The minimum energy structures for RuBPY1 and RuBPY2 have been optimized at DFT/B3LYP along with the LANL2DZ basis set for ruthenium atoms. These optimized structures are further considered to calculate the excited state properties using the TDDFT method. The electrochemical studies of the complexes, investigated in acetonitrile solution, show that this system is associated with a well-defined Ru(III)/Ru(II) reversible couple, rarely observed for a Ru(II) piano-stool-type compound, along with a feature of irreversible ligand oxidation. The absorption cross-section values, obtained from the two-photon absorption studies of title compounds RuBPY1-6, are worth reporting and lie in the range of 3-28 GM (in the femtosecond case).

Improving Signal and Photobleaching Characteristics of Temporal Focusing Microscopy with the Increase in Pulse Repetition Rate.

Wide-field temporal focused (WF-TeFo) two-photon microscopy allows for the simultaneous imaging of a large planar area, with a potential order of magnitude enhancement in the speed of volumetric imaging. To date, low repetition rate laser sources with over half a millijoule per pulse have been required in order to provide the high peak power densities for effective two-photon excitation over the large area. However, this configuration suffers from reduced signal intensity due to the low repetition rate, saturation effects due to increased excitation fluences, as well as faster photobleaching of the fluorescence probe. In contrast, with the recent advent of high repetition rate, high pulse energy laser systems could potentially provide the advantages of high repetition rate systems that are seen in traditional two-photon microscopes, while minimizing the negatives of high fluences in WF-TeFo setups to date. Here, we use a 100 microjoule/high repetition rate (50-100 kHz) laser system to investigate the performance of a WF-TeFo two-photon microscope. While using micro-beads as a sample, we demonstrate a proportionate increase in signal intensity with repetition rate, at no added cost in photobleaching. By decreasing pulse intensity, via a corresponding increase in repetition rate to maintain fluorescence signal intensity, we find that the photobleaching rate is reduced by ~98.4%. We then image live C. elegans at a high repetition rate for 25 min. as a proof-of-principle. Lastly, we identify the steady state temperature increase as the limiting process in further increasing the repetition rate, and we estimate that repetition rate in the range between 0.5 and 5 MHz is ideal for live imaging with a simple theoretical model. With new generation low-cost fiber laser systems offering high pulse energy/high repetition rates in what is essentially a turn-key solution, we anticipate increased adoption of this microscopy technique by the neuroscience community.

Photonic Microresonators from Charge Transfer in Polymer Particles: Toward Enhanced and Tunable Two-Photon Emission.

Novel photonic microresonators with enhanced nonlinear optical (NLO) intensity are fabricated from polymer particles. As an additional advantage, they offer band gap tunability from the visible to near-infrared regions. A special protocol including (i) copolymerization of 4-(1-pyrenyl)-styrene, styrene, and 1,4-divinylbenzene, (ii) extraction of a dispersible and partly dissolvable, lightly cross-linked polymer network (PN), and (iii) treatment of the blue-emitting PN with electron acceptor (A) molecules such as 1,2,4,5-tetracyanobenzene (TCNB) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) furnishes orange- and red-emitting D-A charge-transfer (CT) complexes with the pendant pyrene units. These complexes, here named PN-TCNB and PN-TCNQ, respectively, precipitate as microparticles upon the addition of water and subsequent ultrasonication. Upon electronic excitation, these spherical microparticles act as whispering-gallery-mode resonators by displaying optical resonances in the photoluminescence (PL) spectra because of light confinement. Further, the trapped incident light increases the light-matter interaction and thereby enhances the PL intensity, including the two-photon luminescence. The described protocol for polymer-based CT microresonators with tunable NLO emissions holds promise for a myriad of photonic applications.